Your Position: Home > News > Company News

Siemens Temperature Transmitter : SITRANS T series

2012/8/23      view:

Siemens Temperature Measurement  - Siemens Temperature Transmitter : SITRANS T series


 

 

 

 

 

 Input  Pt 100 resistance
 Output  4 to 20 mA
SITRANS TH100
Temperature Measurement | Head Transmitter
 
SITRANS TH100 is rigid designed for economic use. For example with saving of the galvanic insulation, which is not need for PT100. Therefore the TH100 offers economic plant operation and reliable measurements. It is an ideal substitute for over aged analogue PT100 transmitters. Setup is quick and easy with the transmitter-modem and SIPROM T. This configuration tool can be downloaded for free.


Benefits

  • Measures temperature with a linear output signal
  • High accuracy across entire ambient temperature range
  • Reduces plant noise
  • Alarm signal for sensor break or short circuit according NAMUR 43
  • Explosion protected executions for US, Canada and Europe
  • Slim design, ideal for upgrade of installed PT100 probes with a 4-..20mA signal
  • Rugged design, fully potted electronic

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  - Siemens Temperature Transmitter : SITRANS T series


 

 

 

 

 

Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output 4 to 20 mA
SITRANS TH200
Temperature Measurement | Head Transmitter


 SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt-sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-..20mA loop, the output current can read directly with a multimeter. A red/green LED shows the technician the status at a glance.

Benefits

  • Measures temperature with a linear output signal
  • high accuracy across entire ambient temperature range
  • reduces plant noise
  • Alarm signal for sensor break or short-circuit according NAMUR 43
  • Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
  • Saves expensive compensation cables with the internal reference junction
  • Galvanic insulation for accuracy and safety in thermocouple applications
  • Single- or dual-point trim
  • Custom characteristic curve for application of non-standard sensors
  • Difference- and average- measurement
  • Explosion protected executions for US, Canada and Europe
  • Rugged design, fully potted electronics

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  - Siemens Temperature Transmitter : SITRANS T series


 

 

 

 

 

Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output 4 to 20 mA, HART
SITRANS TH300
Temperature Measurement | Head Transmitter


 SITRANS TH300 with HART- protocol is designed to support all common thermocouples, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4..20mA loop the output current can read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

Benefits

  • Measures temperature with a linear output signal
  • High accuracy across entire ambient temperature range
  • reduces plant noise
  • Alarm signal for sensor break or short-circuit according NAMUR 43
  • Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
  • Save expensive compensation cables with internal reference junction
  • Galvanic insulation for accuracy and safety in thermocouple applications
  • Single- or dual-point trim
  • Custom characteristic curve for application of non-standard sensors
  • Difference- and average- measurement
  • Extensive diagnosis: e.g. drag indicator and time meter
  • Set of output current for simulation
  • Explosion protected executions for US, Canada and Europe
  • Rugged design, fully potted electronics

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  - Siemens Temperature Transmitter : SITRANS T series


 

 

 

 

 

Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
Output PROFIBUS PA (variant), Foundation Fieldbus (variant)
SITRANS TH400
Temperature Measurement | Head Transmitter


 SITRANS TH400 is available either with PROFIBUS PA or FOUNDATION Fieldbus (FF). It is designed to support all common RTD, thermocouple, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM(PA) or AMS and handheld communicator(FF). Due to its small size, the device allows flexible mounting options, even in a DIN Type B connection head.

Benefits

  • Linearization of the sensor values
  • High accuracy across entire ambient temperature range
  • Reduces plant noise
  • Alarm signal for sensor break or short-circuit
  • Electromagnetic compatibility (EMC) according DIN EN 61326 and NE21
  • Saves expensive compensation cables with internal reference junction
  • Galvanic isolation for accuracy and safety in thermocouple applications
  • Single- or dual-point trim
  • Custom characteristic curve for application of non-standard sensors
  • Difference- and average-measurement
  • Measuring value of second sensor for redundancy
  • Extensive diagnostics
  • Simulation mode
  • Explosion-protection for US, Canada and Europe
  • Rugged design, fully potted electronics

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  Siemens Temperature Transmitter  Siemens Temperature Measurement  Siemens Temperature Transmitter


 

 

 

 

 

 Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
 Output 4 to 20 mA
SITRANS TR200
Temperature Measurement | Rail Transmitter


 SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

Benefits

  • Measures temperature with a linear output signal
  • high accuracy across entire ambient temperature range
  • Reduces plant noise
  • Alarm signal for sensor break or short-circuit according NAMUR 43
  • Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
  • Galvanic insulation for accuracy and safety in thermocouple applications
  • Single- or dual-point trim
  • Custom characteristic curve for application of non-standard sensors
  • Difference- and average- measurement
  • Explosion protected versions for Europe
  • Rugged design, potted electronics

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  Siemens Temperature Transmitter Siemens Temperature Measurement  Siemens Temperature Transmitter Siemens Temperature Measurement  Siemens Temperature Transmitter


 

 

 

 

 

 Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
 Output 4 to 20 mA, HART
SITRANS TR300
Temperature Measurement | Rail Transmitter


 SITRANS TR300 with HART- protocol is designed to support all commons, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4-20mA loop the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

Benefits

  • Measures temperature with a linear output signal
  • High accuracy across entire ambient temperature range
  • Reduces plant noise
  • Alarm signal for sensor break or short-circuit according NAMUR 43
  • Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21
  • Galvanic insulation for accuracy and safety in thermocouple applications
  • Single- or dual-point trim
  • Custom characteristic curve for application of non-standard sensors
  • Difference- and average- measurement
  • Extensive diagnosis: e.g. drag indicator and time meter
  • Set of output current for simulation
  • Explosion protected versions for Europe
  • Rugged design, potted electronics

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  Siemens Temperature Transmitter Siemens Temperature Measurement  Siemens Temperature Transmitter Siemens Temperature Measurement  Siemens Temperature Transmitter


 

 

 

 

 

  Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources, Current sources
 

0/4 to 20 mA, HART

0/2 to 10 V, HART

SITRANS TW
Temperature Measurement | Rail Transmitter


 SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM.
Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum.

Benefits

  • Explosion protection [EEx ia] or [EEx ib] for measurements with sensors in the hazardous area
  • Temperature-linear characteristic for all temperature sensors
  • Temperature-linear characteristic can be selected for all temperature
    sensors
  • Diagnostic functions
  • Slave pointer functions

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  Siemens Temperature Transmitter Siemens Temperature Measurement  Siemens Temperature Transmitter Siemens Temperature Measurement  Siemens Temperature Transmitter


 

 

 

 

 

 Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources
 Output

Versions for:

4 to 20 mA, 4…20 mA with HART, Profibus PA or Foundation Fieldbus

SITRANS TF
Temperature Measurement | Field Transmitter


 SITRANS TF is used where other transmitters can't cope. One main point is its rating of IP67.

SITRANS TF is made of rugged die cast aluminum or long-lasting stainless steel. It transforms resistance thermometers, thermocouples, Ohm and mV signals into a load independent DC current corresponding to sensor characteristic or a digital signal according Fieldbus standard Profibus PA or Foundation Fieldbus. The remote mounted sensor prevents the transmitter heating up at high temperature; there are no vibrations and oscillations due to long neck tubes and protective pipes with SITRANS TF.

For tags with difficult access to you can mount your SITRANS TF remotely at easily accessible places and display the measured value on the freely programmable digital display (with version 4 to 20 mA).

You can even use the SITRANS TF in a version without a transmitter as a comfortable field display unit for all 4 to 20 mA signals.
All SITRANS TF are available in intrinsically safe or explosion proof version 

Benefits

  • Local sensing of measured values over digital display
  • Rugged two-chamber enclosure in die-cast aluminium or stainless steel
  • Test terminals for direct read-out of the output signal without breaking the current loop

    >>> For Detail, Please download the brochure & the Catalogue.

 

Siemens Temperature Measurement  Siemens Temperature Transmitter  Siemens Temperature Measurement  Siemens Temperature Transmitter  Siemens Temperature Measurement  Siemens Temperature Transmitter


 

 

 

 

 

 Input Pt100 (IEC 60751)
 Output WirelessHART radio in 2.4 GHz
SITRANS TF280
Temperature Measurement | Field Transmitter


 The SITRANS TF280 is a WirelessHART temperature transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultra low power consumption. Its compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.

Benefits

  • LCD display with functional display items and icons, English and German display selectable
  • Practical push buttons: Three push buttons for maximum efficiency for setup, diagnostics, communication and security settings with no additional devices or tools
  • Maintenance-friendly backlight function
  • Sleep mode for efficient battery life management
  • Battery status display on LCD and in network overview
  • Precise measurement accuracy for more productivity
  • 90 and 180 degree display turnable
  • Configurable with standard tools which support EDD – e. g. with SIMATIC PDM
  • Extension cable for separate installation of the sensor
  • Physical HART maintenance port for commissioning

    >>> For Detail, Please download the brochure & the Catalogue.